有關 Arduino 問題

<span =“apple-style-span” style="line-height: 19px; -webkit-border-horizontal-spacing: 1px; -webkit-border-vertical-spacing: 1px; ">請問大大,有辦法利用 Visa 截取資料嗎??

因為,筆電使用的是舊版的8.5版本,有些vi無法下載。

另外,我利用 Arduino 燒入晶片之後,不知道要怎麼重置。
<span =“apple-style-span” style="line-height: 19px; -webkit-border-horizontal-spacing: 1px; -webkit-border-vertical-spacing: 1px; ">如何使用讓他重置呢??
<span =“apple-style-span” style=“line-height: 19px; -webkit-border-horizontal-spacing: 1px; -webkit-border-vertical-spacing: 1px;”>


[QUOTE=mthunter]<span style=“line-height: 19px; -webkit-border-horizontal-spacing: 1px; -webkit-border-vertical-spacing: 1px” =“apple-style-span”>請問大大,有辦法利用 Visa 截取資料嗎??

因為,筆電使用的是舊版的8.5版本,有些vi無法下載。
該toolkit只有支援LabVIEW 2009以後,通訊的方式就是透過VISA
另外,我利用 Arduino 燒入晶片之後,不知道要怎麼重置。

如何使用讓他重置呢??

如果是使用C upload的話,在板子上晶片旁有一個Reset按鈕



[/QUOTE]

你好,目前我的arduino 沒辦法跟 labview 座連接,不知道為何


com 是對的卻顯示出 error 50002


Init.vi.  Unable to establish connection with Arduino.  Please ensure that you have selected the correct COM port and that you have flashed the Arduino with the correct firmware.


用了好幾台電腦都是這個問題

看來你已經自己解決問題,起碼也分享一下如何解決,給其他人參考,我想問題就是以下我第四篇的回覆

http://it360.tw/forum/forum_posts.asp?TID=13654&FID=23

PS.補充說明以下二個步驟很重要,一定要注意

以下firmware一定要update

How Do I Load the LabVIEW Interface for Arduino Firmware Onto My Arduino Uno?

以下步驟1的COM port一定要設定,有安裝NI-VISA後在安裝Arduino硬體時,Arduino software裡包含有驅動程式,正常安裝後就看是何COM port

問題之所以不能控制是因為,沒將 arduino連接labview的…程式,燒入晶片


[QUOTE=mthunter]問題之所以不能控制是因為,沒將 arduino連接labview的…程式,燒入晶片


[/QUOTE]

FAQ有說明

https://decibel.ni.com/content/docs/DOC-16024

7. Can I deploy LabVIEW Code to my Arduino?

  • No. At this time you cannot deploy LabVIEW Code to your Arduino. You can, however, use the LabVIEW Interface for Arduino to communicate with your Arduino using LabVIEW.