Keithley 2600 Series Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology:
LabVIEW Plug and Play (project-style)
Manufacturer:
Keithley
Supported Language(s):
LabVIEW
Supported Model(s):
2601A, 2602A, 2604A, 2611A, 2612A, 2614A, 2634A, 2635A, 2636A, 2651A, 2657A, 2601B, 2602B, 2604B, 2606B, 2611B, 2612B, 2614B, 2634B, 2635B, 2636B
Model(s) Tested:
2614B, 2606B, 2601B
Interface(s):
USB, GPIB, Ethernet, Serial
Firmware Revision(s) Tested:
3.2.2(2614B), 3.3.0(2606B), 1.0.2(2601B)
Certified:
Yes
NI Supported:
Yes
Source Code Available:
Yes
Driver Revision:
1.1.1
Original Release Date:
02/27/2019
Current Revision Date:
01/21/2022

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

VISA 5.0 or later

Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»LabVIEW Help.

3. Known Issues

To report issues or provide feedback about this instrument driver, please contact technical support.

VIs were not be tested due to hardware not being available during development testing:

Advance Folder Operation.vi

Close File.vi

Open File.vi

Flush File.vi

Read File Data.vi

Set File Position.vi

Set Working Directory.vi

Write File Data.vi

Read TSP Net Remote Instrument Buffer Data.vi

Write TSP Net Remote Instrument Buffer Data.vi

Read TSP Net Remote Instrument Data.vi

Write TSP Net Remote Instrument Data.vi

Abort Remote Instrument Execution.vi

Clear TSP Net Instrument Output Data.vi

Enable TSP Net Connection.vi

Run Remote Instrument Script.vi

Commands were not able to be properly tested due to unknown ranges:

beeper.beep()

bufferVar.timestampresolution

ConfigPulseIMeasureV()

ConfigPulseIMeasureVSweepLin()

ConfigPulseIMeasureVSweepLog()

ConfigPulseVMeasureI()

ConfigPulseVMeasureISweepLin()

ConfigPulseVMeasureISweepLog()

gm_isweep()

gm_vsweep()

i_leakage_measure()

i_leakage_threshold()

lan.linktimeout

lan.timedwait

PulseIMeasureV()

PulseVMeasureI()

smuX.measure.delay

smuX.measure.delayfactor

smuX.measure.rel.levelr

smuX.source.delay

smuX.source.limitp

smuX.source.offlimitY

smuX.trigger.source.linearY()

smuX.trigger.source.listY()

smuX.trigger.source.logY()

SweepILinMeasureV()

SweepIListMeasureV()

SweepILogMeasureV()

SweepVLinMeasureI()

SweepVListMeasureI()

SweepVLogMeasureI()


4. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.


REV 1.0, 02/27/2019
Modified by: Xuedan Zhao, Shanghai, China.
Original release.


REV 1.1, 12/31/2020
Modified by: Anurag Preman, Bangalore, India, NI.

  • New VIs:
  • Added Enable Pulse.vi
  • Configure Pulse Measurement Aperture.vi
  • Configure Pulse Measurement Delay.vi
  • Configure Pulser Protect Sense Voltage.vi
  • Configure Pulser Protect Source Voltage.vi
  • Configure Pulser Range.vi
  • Configure Trigger Source Pulse Width.vi
  • Pulser Protect Tripped Status.vi


    • REV 1.1.1, 01/21/2021
    Modified by: Chitra Arjunan, Bangalore, India, NI.
  • Modified Default Instrument Setup.vi