我已經試著從7.1的例子裡面找
但是我找不到可以簡單讀取PRINT PORT訊號的例子
不知道是我的方向錯誤還是怎樣 請問哪邊有可以簡單經由PRINT PORT讀訊號的例子---是不是 parallel port阿
如果是的話 我想問如果我有一個 磁黃開關 我的訊號線 是直接接在 電腦的print 後面嗎 還是需要一個介面來連接兩者
我看他的說明 好像我還需要去電腦的BIOS改東西 還要 去定義他的位址.....我就不懂他的意思了
1) Place the parallel port into standard mode (SPP) from the computer's BIOS configuration. This may also appear as AT or PS/2 mode in some BIOS utilities. The modes to avoid are EPP and ECP.
2) Determine the parallel port's base address and enter it into the Data Register (Base +0) control.
3) Enter the desired update rate for the parallel port data into the update rate control.
4) Run the VI and the current state of the data, status, and control registers will be displayed. Input line states may be changed by pulling them to ground or driving them high externally.
感謝喔............另外我要做遠端
Web Publishing tool 是一種工具嗎 軟體嗎 因為有人建議我可以使用他 再用IE監控
所以我不太清楚 我有去 估狗 查 但是感覺他是一項技術 所以我不清楚我該如何下手
BIBBY38699.5606828704